1510/12 Audio / Microphone Preamp

THAT 1510/12 Audio Preamp ICs

The 1510 and 1512 are available from Stock !

The new THAT 1510 and 1512 are high-performance audio preamplifiers suitable for

microphone preamp and bus summing applications. The 1510 is pin compatible with

the Analog Devices SSM2017 but with improved specifications in key areas, including

low-gain noise, THD, slew rate, bandwidth, and power consumption.

Because the 1512 exhibits significantly lower noise at lower gain settings, it is recommended over the 1510 for new designs.

Designed from the ground up in THAT's complementary bipolar, dielectric isolation

process, the THAT 1510 and 1512 improve on existing integrated microphone preamps by

offering lower noise at low gains, better distortion characteristics, lower power

consumption, higher slew rate and bandwidth, and increased output voltage swing. The

parts are fully protected against ESD on all critical pins, and reliability is further enhanced

by its reduced power requirements.

All 1510/1512 parts are lead-free.


1512S14-U 14 PIN SOIC	1510P-U / 1512P-U 8 PIN DIP	1510S8-U / 1512S8-U 8 PIN SOIC

	Low Noise: 1 nV/√Hz input noise (60dB gain) 34 nV/√Hz input noise (0dB gain)
	Low THD+N (full audio bandwidth): 0.0005% ≤ 40dB gain 0.005% @ 60 dB gain
	Low Supply Current: 6 mA
	Wide Bandwidth: 7MHz @ G=100
	High Slew Rate: 19 V/µs
	Wide Output Swing: ±13.3V on ±15V supplies
	Gain Adjustable from 0 to >60dB with one external resistor
	Industry Standard Pinouts

Specifications:

	THD (f=1kHz, BW=20kHz, 60dB gain): 0.005 %
	Equiv Input Noise (f=1kHz, 60 dB gain): 1 nV/√Hz
	Slew Rate (RL=2kW, CL=50pF): 28 V/µs
	Bandwidth -3 dB (RL=2kW,CL=10pF, 60dB gain):
	3 MHz
	Supply Voltage Range: ±5V to ±20V

Specifications:

	Differential Low Noise Preamplifiers
	Differential Summing Amplifiers
	Differential Variable Gain Amplifiers
	Microphone Preamplifiers
	Moving-Coil Transducer Amplifiers
	Line Input Stages
	Audio
	Sonar
	Instrumentation

For pricing and more information: icsales@cedos.com

To download the datasheets in PDF format, please click on the picture.